0 items
 
800-229-0009
952-556-5666

Loc-Line

Loc-Line

Loc-Line

The Loc-Line Modular Hose System

This unique, easy, inter-locking system of durable, high impact plastic connectors route blown air to providing a big assist in keeping critical in-line areas clean and free of dust, trim and debris to keep your operation running smooth.

This hose system is ideal for presses, stitchers, trimmers and folders in areas that need directly blown air to help get rid of waste. Purchase Loc-Line System Parts to keep an area of your machine clean and to hold paper in place. 

 
1/4" System 1/2" System


Click the Image Below to View Parts

90 Degree Nozzle 90 Degree Spray Bar Double Socket NPT Connector Elbow Fitting In-Line Check Valve Flat Slot Nozzle Hose Adapters T Fitting Y Fitting Valve 1/4" Socket x 1/8" FNPT Swivel Nozzle Y Fitting Y Fitting Y Fitting Extended Element Camp Flare Nut Fitting Flare Nozzle Straight Flow Nozzle Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment Hose Segment

 

Showing 1 - 20 of 28 « First < Previous 1 2 Next > Last »
Assembly Pliers

Assembly Pliers

Use these pliers to assemble Loc-Line Hose.

Hose Segments

Hose Segments

Hose segments for making connections and directing flow toward the target.

Double Sockets

Double Sockets

Allows users to put a Loc-Line connector on both ends.

Flare Nut Fittings

Flare Nut Fittings

A popular fitting for air applications. 3/8" flare nuts fit to 5/8 - 18 threads & 1/4" flare nuts fit to 7/16 - 20 threads.

Y Fittings & Reducers

Y Fittings & Reducers

Multiple nozzles can be attached to one supply line. Reducing Y's connect a larger supply line to two smaller hose diameters.

Valves

Valves

Regulate coolant or air flow to your work area. 1/4 turn of handle opens or closes the valve.

Flare Nozzles

Flare Nozzles

Spreads coolant or air over a wide area without restricting the flow volume.

Elbow Fittings

Elbow Fittings

Attaches directly to NPT fittings where tight turns are needed.

90 Degree Nozzles

90 Degree Nozzles

90 degree nozzles allow coolant flow close to the tool.

In-Line Check Valves

In-Line Check Valves

Maintain fluid in the hose for the next cutting operation, thus reducing dry cutting. Helps eliminate fluid dripping from the hose after the pump is shut off.

1/4" Socket x 1/8" FNPT

1/4" Socket x 1/8" FNPT

Allows users to screw on a specialty nozzle.

Swivel Nozzles

Swivel Nozzles

Adjustable spray head features 40 degree range of motion over flared base. Evenly spaced holes for even distribution of liquid or air.

T Fittings

T Fittings

Connect 2 hoses from one source in a 90 degree configuration.

Flat Nozzles

Flat Nozzles

Provides a thin flat pattern for precise directional control of air or fluids. Available with slots or holes.

Hose Adaptors

Hose Adaptors

Allows larger ID hoses to be reduced to smaller ID systems - 1/2" to 1/4"

Straight Flow Nozzles

Straight Flow Nozzles

Nozzles designed to optimize an even flow pattern over a wide area while reducing build-up at the nozzle edges.

Male Connector

Male Connector

Connect Loc-Line with National Pipe Thread or British Standard Pipe Thread connections.

Round Nozzles

Round Nozzles

Direct coolant or air straight towards a target.

Extended Elements

Extended Elements

These tighten onto any standard Loc-Line element in the same size system. They reduce dynamic motion at higher pressures and make it easier to run longer lengths of hose.

End Caps

End Caps

End caps for blocking Loc-Line outflows.

Showing 1 - 20 of 28 « First < Previous 1 2 Next > Last »