0 items
 
800-229-0009
952-556-5666

Thermofix Tools & Glue

clear

Thermofix Tools & Glue

 

Thermofix Process Heat Press Comparison 


 

HABASIT BELT SKIVER 60mm

PART # AT-60
Sign in to see pricing or create an account.

The AT-60 is a preparing device for skiving of Habasit belts and tapes. The belt is clamped and stuck to a steel plate. It is ground manually by means of a grinding disk. The AT-60 is especially suitable for occasional preparation of single...

HABASIT ABRASIVE DISC FOR AT-60

PART # SKIVER-DISC
Sign in to see pricing or create an account.

Replacement abrasive disc for the AT-60 .

BELT SKIVER HABASIT 120V MOTORIZED

PART # AT-200M
Sign in to see pricing or create an account.

The AT-200M is a preparing device for skiving of Habasit belts and tapes. It comes with a motor to drive the sanding cylinder for precise skiving. Belts can be skived one at a time or lined up to skive several at once. The AT-200 is suitable...

HABASIT ADHESIVE 40 GRAM BOTTLE WITH BRUSH

PART # FIXOL
Sign in to see pricing or create an account.

This adhesive is used for the Thermofix belt joing method. It comes in a 40 gram (1.4 oz.) container. Please use caution when using and refer to the SDS sheet .

HABASIT RUBBER ADHESIVE 30 GRAM TUBE

PART # VULCOL
Sign in to see pricing or create an account.

Vulcol rubber adhesive is used in the thermofix belt joining method for a number of belts. It comes in a 30 gram (1.06 oz.) container. Please use caution when using and refer to the SDS sheet .

HEATING ELEMENT ASSEMBLY FOR PT-103 THERMOFIX PRESS

PART # P-0999
Sign in to see pricing or create an account.

THERMOFIX PRESS HABASIT 50mm LOW PROFILE

PART # PT-55
Sign in to see pricing or create an account.

The PT-55 is a hot-pressing device designed for the joining of machine tape and spindle tape up to 50mm wide and 2.5mm thick using the thermofix procedure. It's compact and lightweight design allows you to use it on-site....

THERMOFIX PRESS HABASIT 100mm LOW PROFILE

PART # PT-103
Sign in to see pricing or create an account.

The PT-103 is a hot pressing device for joining Habasit belts using the Thermofix system (skived and bonded). The device is extremely compact. Top and bottom parts can be separated with a handle‚ allowing belts to be joined also in...

THERMOFIX PRESS HABASIT 100mm LOW PROFILE WITH SET UP PLATE

PART # PT-103S
Sign in to see pricing or create an account.

The PT-103S is a hot pressing device for joining Habasit belts using the Thermofix system (skived and bonded). Top and bottom parts can be separated. A special setup plate ensures the correct positioning of the belt ends....

THERMOFIX PRESS HABASIT 100mm 120V

PART # PT-100
Sign in to see pricing or create an account.

The PT-100 is a hot-pressing device for the Thermofix method of joining belts. The lower press plate is heated and is equipped with a detachable set-up plate with clamping springs for secure positioning of the belt ends. Its knuckle joint...

THERMOFIX PRESS HABASIT 300mm

PART # PT-300
Sign in to see pricing or create an account.

The PT-300 is a hot-pressing device designed for joining Habasit driving and conveyor belts using the Thermofix procedure. The heated bottom pressure plate is fitted with a removable setting plate with clamping bars for securely fixing the...