Maintenance
• Check for wear every
3,000 hours• Replace vanes once they reach a minimum width of
28mm• Make sure the beveled edge rides smoothly against the cylinder wall.
• Vane life depends mostly on
temperature and
vacuum level. Run the pump in an ambient environment with adequate air flow and a
max temp. of 100°F.
• Keep dirt and debris off the pump and motor using compressed air every
2000 hours.
• Starting and stopping
more than 3 times per hour will deteriorate vane life.
• Run the pump at the lowest acceptable pressure level. Â
* These intervals are basic guidelines. You may find either more or less frequent attention is needed, depending on your application. Documents
Becker
 
