Becker Original Vanes DVT/KDT/KVT 2.60 (WN124-033) (Set of 4)
Double-tap and hold to zoom.
Mouse over the image to zoom.

Becker Original Vanes DVT/KDT/KVT 2.60 (WN124-033) (Set of 4)

Part Number: 90132900004

Becker Original pump vanes 90132900004 | WN 124-033

Set of 4 carbon vanes

For Becker pumps:

• KDT / KVT 2.60

• DVT 2.60 (requires 2 sets / equivalent to part# 90132900008)

$394.14 /SET
List price: $394.14 /SET
  • Vane Dimensions : 135 x 39 x 4mm
    • SET
  • Availability: In stock

Use the info below as a maintenance guide for 90132900004 vanes:

• Check for wear every 3,000 hours

• Replace vanes once they reach a minimum width of 21mm

• Make sure the beveled edge rides smoothly against the cylinder wall.

• Vane life depends mostly on temperature and vacuum level. Run the pump in an ambient environment with adequate air flow and a max temp. of 100°F.

• Keep dirt and debris off the pump and motor using compressed air every 2000 hours.

• Starting and stopping more than 3 times per hour will deteriorate vane life.

• Run the pump at the lowest acceptable pressure level.  

 

* These intervals are basic guidelines. You may find either more or less frequent attention is needed, depending on your application.

You May Also Be Interested In

Filter Cartridge, Becker Original 90950500000
  • $33.21 /EACH
  • List price $33.21 /EACH
  • EACH
  • Availability: In stock
Amblygon Grease TA15/2 45g. Becker
  • $79.90 /EACH
  • List price $79.90 /EACH
  • EACH
  • Availability: In stock
Filter Cartridge, Becker Original 90950700000
  • $44.20 /EACH
  • List price $44.20 /EACH
  • EACH
  • Availability: In stock
Overhaul Set Becker DVT 2.60 (33802100000)
  • $1,732.48 /EACH
  • List price $1,732.48 /EACH
  • EACH
  • Availability: In stock