Becker Original Vanes DT/T/VT 3.16/4.16 (WN124-120) (Set of 7)

Use the info below as a maintenance guide for 90134700007 vanes:

• Check for wear every 3,000 hours

• Replace vanes once they reach a minimum width of 21mm

• Make sure the beveled edge rides smoothly against the cylinder wall.

• Vane life depends mostly on temperature and vacuum level. Run the pump in an ambient environment with adequate air flow and a max temp. of 100°F.

• Keep dirt and debris off the pump and motor using compressed air every 2000 hours.

• Starting and stopping more than 3 times per hour will deteriorate vane life.

• Run the pump at the lowest acceptable pressure level.  

* These intervals are basic guidelines. You may find either more or less frequent attention is needed, depending on your application.