Habasit Manual Belt Skiver 60mm
Double-tap and hold to zoom.
Mouse over the image to zoom.

Habasit Manual Belt Skiver 60mm

Part Number: AT-60

The AT-60 is a preparing device for skiving of Habasit belts and tapes. The belt is clamped and stuck to a steel plate. It is ground manually by means of a grinding disk. The AT-60 is especially suitable for occasional preparation of single belts or spindle tapes on site; it is not designed for fabrication in series.

$620.55 /EACH
List price: $620.55 /EACH
    • EACH
  • Availability: In stock
Technical Data
Belt/Tape Max Width:  60mm (2 in.)
Belt/Tape Max Width for joining angle of 75°:  44mm (1.7 in.)
Belt/Tape Max Thickness:  2mm (.08 in.)
Max Skiving Length:  40mm (1.6 in.)
Dimensions (LWH):  220 x 190 x 85mm (8.66 x 7.48 x 3.35 in.)